Specifications:
Material: Shell: ABS plastic, Pump shaft: Zirconia ceramic, Rotor: Ferrite, POM
Power supply: solar panel, battery, adapter, power module
Drive mode: Brushless, magnetic isolation
Power consumption: 22W
Rated voltage: 24V
Rated current: 920mA
Max flow rate: 800L/H(210GPH)
Max lift height: 5M/16ft
Diameter of inlet: G1/2" male thread;
Diameter of outlet: G1/2" male thread;
Noise: <35dB
Waterproof level: IP68
Lifespan: More than 30,000hrs
Working temperature: 0℃ - 65℃/(32°F - 149°F)
Item dimension: 77*63*49mm
Weight:220g(7.8ounces)
Cable length: Approx. 50cm (19.7")
Wiring: The red wire is connected to the positive pole of the power supply, and the black wire is connected to the negative pole of the power supply.
Note:
1, This is a submersible centrifugal water pump. It must be immersed in the water, or the water level of the external water source must be lower than the water inlet nozzle of the water pump when the pipeline is connected, so that the air after the water pump is discharged and the water is pumped normally.
2, The head of the water pump is the maximum water delivery height, that is, the flow rate to the maximum head point is zero.
3. This pump cannot work without water for a long time.
Package includes:
1 x 24 V G1/2" male thread brushless water pump