favorite
favorite
hide
unhide
flag

Posted

print

Tech21 PE-60 Power Engine 60w - $200 (Lincoln Heights)

Tech21 PE-60 Power Engine 60w 1 thumbnailTech21 PE-60 Power Engine 60w 2 thumbnailTech21 PE-60 Power Engine 60w 3 thumbnail
This little and light amp is surprisingly loud! A single 12" Celestion Seventy 80 speaker and you can compete in a live band situation. Perfect for monitoring with any modeler like Kemper, AxeFX, Line 6, ToneX, etc.

Please note where I am on the map -- Lincoln Heights, near downtown/Highland Park/Pasadena


Tech 21 Power Engine 60 Powered Cabinet

The Power Engine 60 is an all-purpose, multi-function, powered extension cabinet. They can be used with any direct recording device or pre-amp, analog or digital, tube or solid state, in stompbox or rackmount formats –including our very own line of SansAmps. When plugging your favorite device into a Power Engine, the tone is unaffected. So there’s no need to labor over readjusting all your parameters that would otherwise be colored by a conventional amp.

These handsome cabinets perfectly complement our line of Trademark combo amps. The Power Engine 60 will accept XLR and 1/4” inputs and includes a balanced XLR output to ‘daisy-chain’ with other Power Engine 60s. Knowing that not all rooms are created acoustically perfect, you can compensate for less than ideal environments by adjusting the on-board, active three-band EQ.

Wherever your tones come from, make the Power Engine 60 your destination for portable, pure reproduction.

Model Number PW60

Input Impedance: 10kOhms

Nominal Input Level-20dBm to +4dBm

Optimal Output Load: 8 Ohms

Power Output: 60W

Maximum Power Consumption: 120W

AC Input Power (factory set): 100V, 117V, 230V, 240V

Cycles: 50/60 Hz

Speaker:

(1×12) Celestion ® Seventy 80 Model #CT2112-8 12″, 80W, 8Ω
Cabinet Dimensions:

(1×12) 20″l x 11″w x 18″h

Weight: 1×12: 33 lbs

post id: 7744437893

posted:

updated:

best of [?]

loading
reading
writing
saving
searching