favorite
favorite
hide
unhide
flag

Posted

print

Invisible Surround Sound System Amina Mobius 7i Invisible Speaker Set - $6,000

Invisible Surround Sound System Amina Mobius 7i Invisible Speaker Set 1 thumbnailInvisible Surround Sound System Amina Mobius 7i Invisible Speaker Set 2 thumbnailInvisible Surround Sound System Amina Mobius 7i Invisible Speaker Set 3 thumbnailInvisible Surround Sound System Amina Mobius 7i Invisible Speaker Set 4 thumbnailInvisible Surround Sound System Amina Mobius 7i Invisible Speaker Set 5 thumbnailInvisible Surround Sound System Amina Mobius 7i Invisible Speaker Set 6 thumbnailInvisible Surround Sound System Amina Mobius 7i Invisible Speaker Set 7 thumbnail
condition: new
make / manufacturer: Amina
model name / number: Mobius 7i

more ads by this user

The newest version of these speakers and backbox from 2022.
These are NEW and boxes have NEVER been opened.

One Amina speaker goes for $3,000-$5,000 EACH RETAIL.
One Amina CV345 Backbox goes for $150.00 EACH RETAIL.
One Amina 8 Channel-Rack Mountable Speaker Protection Unit goes for $600 EACH RETAIL.
THIS IS AN AMAZING DEAL.
I am willing to sell separately if you don't want the full package, But will be charging more due to separating set.
Made In Britain.
FREE SHIPPING IF NEEDING TO SHIP OUT OF STATE!!!

Bundle includes:

(2) boxes of Amina Mobius 7i speakers
***EACH BOX INCLUDES A PAIR OF SPEAKERS
SO 4 SPEAKERS TOTAL

(1) box of Amina Mobius 7i SINGLE speaker

(4) boxes of Amina Backbox CV345
4 Backbox TOTAL

(1) Amina 8 Channel-Rack Mountable Speaker Protection Unit (Not Pictured)

This bundle is enough for a complete surround sound system.
There is only 1 back box missing from the set that is needed for the single speaker.
MSRP for the entire set is $18,595.00


Mobius 7i invisible speaker:
4 Ohms
75W/150W 87dB
1m/2.83Vrms
65Hz – 27kHz (- 6db)
1.8kg (3.96lbs)
450mm x 345mm x 30.7mm
BackboxCV345
APUi70C_2 or GUARDIAN ACTIVE

Amina CV345 Cavity Wall/Speaker Backbox:
Easy to install, sound proofing backbox for the Amina Invisible Speakers. For use in plasterboard cavity walls (drywalls) and ceilings, the BackboxCV345 creates a sealed enclosure around the back of the speaker utilising a specially designed composite sound proofing layer. The BackboxCV345 is recommended for multispeaker installations where the cavity loading the backbox provides will ensure consistent sound quality from all speaker locations.
Sound Proofing Characteristic:
Over the 150Hz – 5KHz range the rear firing airborne sound pressure is reduced on average by 26dB. It is recommended that additional sound proofing steps are taken if your speakers are installed in a wall or ceiling where bedrooms or other occupied rooms are directly adjacent. The BackboxCV345 cannot stop mechanically induced noise transmission inherent in certain building structures.

Installation:
The BackboxCV345 is designed to be retrofitted into the plasterboard wall or ceiling. Importantly it is fixed to the plasterboard only (not surrounding studwork) which reduces potential energy transfer to the wall/ceiling joists. Our detailed installation guide provides information on how to achieve the correct speaker face alignment for different types of plaster finishes and plasterboard thicknesses. Optional alignment shims are also available.




The Backbox CV345 creates an acoustically tuned and consistent cavity behind the speaker, helping to ensure both consistent audio quality as well as minimizing rearward airborne sound transmission where Mobius loudspeakers are installed into stud walls/ceiling.

345mm wide Backbox for use in cavity walls and ceilings.
Use with Edge7, Edge5, Mobius7, Mobiu5, MobiusDual.
incl. Acoustic absorbing inner lining
Dimensions: 500mm x 351mm x 71.5mm
Cut-Out Required: 455mm x 350mm

Amina 8 Channel Rack Mountable Rack:
The Amina APURS8iC is a passive eight channel rack-mountable Protection Unit, designed for use in installations whereby a higher concentration of low-impedance Loudspeakers are present within a centralised AV rack. Direct-to-PCB screw terminal blocks allow for quick, hassle-free permanent installation.

With each channel containing a selectable HPF and self-resetting thermal fuse circuit, you can rest assured that each speaker will perform safely (even when pushed to its limits.)

Product Features:
Works with all panels (except AIW750)
8 channel, 19″, 1U rack-mounted Protection Unit
High-pass filter; featuring current sensing with self-resetting fuse protection


FOR MORE INFORMATION ON THE ITEMS, YOU CAN GO TO:
aminasound.com

post id: 7743817663

posted:

updated:

best of [?]

loading
reading
writing
saving
searching