loading
reading
writing
saving
searching
Paradigm high-end home theater speakers (Sub, Center, FR, FL, RR, RL) - $1,950 (SFV)
make / manufacturer:
Paradigm
QR Code Link to This Post
Included in this set:
Paradigm Monitor 7 v.2: (Front Left tower)
Paradigm Monitor 7 v.2: (Front Right tower)
Paradigm CC-370 v.2: (Center channel)
Paradigm ADP-170 v.2: (Rear Left – bipole radiator)
Paradigm ADP-170 v.2: (Rear Right - bipole radiator)
Paradigm PW-2200: (Subwoofer). This thing is an animal… 1500 watts peak of power!
For those of you who don’t know, Paradigm produces high performance audio equipment all crafted in Canada.
These were the original MSRP prices for the speakers:
- Paradigm Monitor 7 v.2: $700 (Front Left)
- Paradigm Monitor 7 v.2: $700 (Front Right)
- Paradigm CC-370 v.2: $700 (Center)
- Paradigm ADP-170 v.2: $250 (Rear Left)
- Paradigm ADP-170 v.2: $250 (Rear Right)
- Paradigm PW-2200: $1,400 (Subwoofer).
For a total of $4,000 + tax
The color of the speakers are ‘black ash’ and they all are in fantastic condition with only minute cosmetic blemishes (all the speakers work perfectly).
Here are the specifications of the speakers:
Paradigm Monitor 7 v.2’s
- 2 way bass-reflex (3 drivers), 120W. Two 165mm (6.5") drivers with diecast chassis, ICP injection-moulded co-polymer polypropylene cone, Apical former, and one
25mm (1") PTD pure-titanium dome and former, ferro-fluid damped/cooled tweeter.
8 ohm nominal.
Paradigm CC-370 v.2:
- 2 way center channel (3 drivers), 120W. Two x 165mm (6.5") drivers with diecast chassis, ICP injection-moulded co-polymer polypropylene cone, Apical former, and one 25mm (1") PTD pure-titanium dome and former, ferro-fluid damped/cooled tweeter.
Paradigm ADP-170 v.2’s:
- 4-driver, 2-way optimized reverberant surround. Two 19mm (3/4in) CM ceramic/metal composite domes. Two 140mm (5-1/2in) poly - propylene cones, die-cast chassis. 85Hz - 20kHz.
Suitable Amplifier Power Range: 15 - 100 watts
Paradigm PW-2200:
- Type: Subwoofer
Design: Single driver, bass reflex, high-velocity low-turbulence resistive port, built-in Ultra-Class-D amplifier
Amplifier: High-Current, Discrete Output: 400 watts RMS (20–150Hz @ < 0.1% THD) 1500 watts Peak
Amplifier Design Features: Auto-On / Off, soft clipping
Bass Driver: 5-mm (12 in) RCR mineral-filled co-polymer polypropylene cone. 51-mm (2 in) bifilar 2+2 layer voice coil, dual spiders, AVS die-cast heatsink chassis.
Low Frequency Extension: 18Hz (DIN)
Subwoofer Cutoff Frequency: Variable 50Hz – 150Hz
Sub./Sat. Phase Alignment: Variable 0º – 180º
Line Level Input: From Sub-Out / LFE-Out of receiver / processor, or other line level source.
Line Level Input Sensitivity: 100 mV stereo; 200 mV mono
Line Level Input Impedance: 15 k ohms
Line Level High-Pass Output: To left / right of amplifier input or left / right Main-In of receiver
Line Level High-Pass Output Roll-Off: 3rd-order 18 dB / octave at 80 Hz