loading
reading
writing
saving
searching
Pair of Corner JBL Synthesis Surround Sound Speakers (Subwoofers) - $450 (Tarzana)
QR Code Link to This Post
This entire system was left in a celebrity home where the owner hosted many great movie-viewing parties for his celebrity friends. I have now bought this home and do not plan to keep the movie theater or music room, so I have no need for this amazing equipment.
NOTE: Although this $450 listing is just for the set of 2 corner subwoofer speakers shown in the first photos, ALL of the following items are also for sale in other Craig's List postings, and all are in good working order with no major cracks, knicks, scratches, dents, etc. These were well-protected inside of custom built cabinetry for the short time they were used, so no dust even got into them. These are all in top shape!
1 & 2) JBL Synthesis corner speakers (Qty:2) - #S3S: $450
Frequency Response: 30Hz - 300Hz (-6dB)
Power Handling: 400 watts RMS
Sensitivity: 90 dB (2.83V @ 1m)
Nominal Impedance: 4 ohms
Drivers:
Equipped with a single 12-inch low-frequency transducer designed for sub-bass and bass frequencies
Enclosure Type: Sealed or ported design, optimized for corner placement to maximize bass response
Cabinet Finish: Black wood grain finish to match other JBL Synthesis components
Dimensions: Approximately 21" W x 20.5" D x 17" H
Weight: Around 65 pounds each
---------------
3 & 4) The JBL Synthesis TWO speakers, (Qty: 2) Surround Speakers: $250
Frequency Response: 80Hz - 22kHz (-3dB)
Power Handling: 200 watts RMS
Sensitivity: 89 dB (2.83V @ 1m)
Nominal Impedance: 8 ohms
Drivers:
High-Frequency Driver: 1" compression driver with a horn-loaded tweeter for wide dispersion
Woofer: 8" low-frequency transducer
Crossover Frequency: Typically around 2.2kHz
Cabinet Finish: Black wood grain or matte finish, matching other JBL Synthesis speakers
Dimensions: Approx. 12" W x 9.5" D x 14" H
Weight: Around 18-20 pounds per speaker
--------------
5) JBL Synthesis SDP-3 THX Ultra Certified Digital Surround Processor/Controller - with Prologic Sound and DTS Sound, all working together to give you an in-home sound that rivals that of the largest and best movie theaters or a professional music recording studio. $399
This has the original manual as well.
Measurers: 17.3 W x 11.5D x 3.6"H / 10 pounds each
INPUTS: Audio: 8 stereo (RCA) pairs / Video: 8 composite (RCA), 8 S-video
Digital: 8: 5 coaxial (RCA), 3 optical (TosLink), conforms to IEC-958,
S/PDIF standards; 3 Expansion Ports for 96kHz, 24-bit PCM digital audio
OUTPUTS: Audio: 8 main (RCA): Left, Center, Right, L&R Sides, L&R Rears, Subwoofer 3 stereo pairs: 2 Record, 1 Zone 2
Video: 3 composite (RCA), 3 S-video: 1 Monitor, 2 Record
Audio: A/D Conversion: 24-bit Delta-Sigma
D/A Conversion: 24-bit Delta-Sigma
Frequency Response: 10 Hz – 20 kHz, +0.2dB, -0.3dB, referenced to 1kHz
THD+Noise: Less than 0.005% @ 1kHz, maximum output level
Dynamic Range: 105dB minimum, 22kHz bandwidth, referenced to 1kHz @ –60dB below maximum output level
Signal-to-Noise Ratio: 105dB minimum, 22kHz bandwidth, referenced to 1kHz at maximum output level
Input Level: 2 Vrms for maximum output (with Input Gain=0 dB); 200mV rms for Dolby level
Input Impedance: 100 kΩ in parallel with 150pF
Output Level: 6Vrms (System Volume = +12dB)
Output Impedance: 100Ω in parallel with 150pF
Video: NTSC M, PAL and SECAM-compatible
Output Level: 1.0 V peak-to-peak
Impedance: 75Ω
Input Return Loss: 40dB
Differential Gain: <0.5%
Differential Phase: <0.5°
Frequency Response: 10Hz to 10MHz ±0.1dB
Bandwidth: >25MHz
K Factor: <0.3%
Gain: ±0.15dB
Signal/Noise Ratio: >70dB
Power Requirements: 90–250 VAC, 50-60Hz, 35 Watts (universal input); IEC detachable power cord
Rack Mounted Option: 19.0"W x 11.5"D x 3.5"H (483 x 292 x 89mm) Weight: 10.8 lbs.
Remote Control: Hand-held, battery-powered infrared remote control unit, uses 2 AA batteries
--------------
6) JBL Synthesis Amplifier #S400 for $399
The JBL Synthesis S400 is an amplifier in the JBL Synthesis lineup.
Here are the general technical specifications:
Power Output:
400 watts per channel into 8 ohms (2 channels driven)
600 watts per channel into 4 ohms (2 channels driven)
Number of Channels: 2-channel stereo amplifier
Frequency Response: 20Hz - 20kHz (+0, -0.1dB)
Signal-to-Noise Ratio: Greater than 105 dB (A-weighted)
Total Harmonic Distortion (THD): Less than 0.03% at rated power
Damping Factor: Greater than 200
Input Sensitivity: 1.0V for full rated output
Input Impedance: 20 kOhms (balanced), 10 kOhms (unbalanced)
Connections:
Balanced (XLR) and unbalanced (RCA) inputs
High-quality speaker binding posts for outputs
Protection Features:
Overload protection
Thermal protection
Short circuit protection
Cooling: Forced-air cooling with a quiet fan
Dimensions: 19" W x 17" D x 7" H
Weight: Approximately 45 pounds
The JBL S400 is designed for high-performance audio systems, providing ample power for demanding home theater or audio setups. The specs ensure clean, high-fidelity sound with plenty of headroom.
-----------------------
7) JBL Synthesis Digital Equalizer Controller #SDEC-2500 for $399
19"W x 18"D x 3.5"H
• 6-Channel input, 7-channel output.
• 83-band parametric EQ.
• auto-power.
• overload protection.
• Imported from USA (Sizes & Specifications are based on the USA Market).
Digital Audio Signal Processor, (6 Channel Input, 7-Channel
Output, 83-Band Parametric EQ, Auto-Power, Overload Protection)
Auto-Arrival-Time-Correction, Auto-Screen-Compensation,
Electronic Music-/Cinema-Mode Switching.
Reach out for any individual item, or get the entire 7 piece system for a discounted total of only $1795.