favorite
favorite
hide
unhide
flag

Posted

print

CMM PROGRAMMER (Oxnard)

OVER 8,000 HOURS PROGRAMMING AND RUNNING (OGP) OPTICAL GAGE PRODUCT CMM MEASURE X VERSION 2.18.2 SOFTWARE. FOR DOD, NSA, AEROSPACE, MILITARY, MEDICAL, AND COMMERCIAL PRODUCT also MITUTOYO using COSMOS SOFTWARE (manual and already created programs)

RHYS McGOVERN
show contact info

EXPERIENCE:

Risk Assessment Consultant – Parker-Meggit Systems (Contract) 6/2023-12/23
• ISO 31000, 14001 for all suppliers and all their suppliers
• a risk assessment 3-hour interview to assure
the risk is minimal if any situation occurs. Alignment with Parker-Meggitt Systems
• Leadership & Culture (ISO 9001)
•Resources (ISO 31000)
•Management (ISO 31000)
•Financial (ISO 31000)
•SIOP (Sales Inventory, Operational Planning ISO 9001, 31000)
•Capacity,
•Supply Chain Management ISO 9001, 31000)
•Manufacturing (ISO 9001)
\•Design (ISO 9001)
\• Quality (ISO 9001, 31000, 14001, AS9100, 9101, 9102, NADCAP AC 7004)
• EH &S z(Environmental Health & Safety (ISO14001)


Quality Specialist III | The Boeing Company (Contract)| 8/2022 -1/2023
Source Inspector/Supplier Quality Engineer

• travel to various suppliers for Boeing verifying parts, assemblies, ATP's, documentation: GD&T machining, coatings (anodize, chem film, Ni, NiCr, Au, galvanize, powder) primer, paint, electrical, hydraulics, glass (windshields), connectors, V- band release mechanism actuators, skins (wings), 3-phase transmission converter, fluid pumping, fuel control, valves auction,
•F-15 strike eagle, F/A 18 Super Hornet, V-280 Valor, ISS International Space Station.


Consultant Quality Assurance/CAD Design | McREL & Associates/EDD | 11/2000 - Present

• Consulting for Quality Assurance, Procurement of projects, designing product w/Solidworks, AutoCAD, TurboCAD. 2D and 3D modeling, Simulation, Force, Pressure, Torque, Thermal, Structural, Collision Detection, Mechanical, Electronics, Drawings, Layouts, Word, Excel (spreadsheets), Power Points,
• QMS (Quality Management System). Internal-external audits.
• AS (Aerospace Standards) 9100, 9101, 9102. SAE (Society of Automotive Engineers) 9100C
• ISO (International Standards Organization) 9000, 9001, 13485, 17025, 14791, 31000.
• NADCAP (National Aerospace and Defense Contractors Accredited Program) AC 7004.
• DSCC (Defense Supply Chain Columbus OH).
• FAA (Federal Aviation Administration) 14 CFR Part 21, 45 Subpart F & G Production 8110.42. 8120.22, 8120.23
• Mil-PRF-STD (Military Performance Specifications/Standards), DOD (Department of Defense), NSA (National Security Agency).
• GMP (Good Manufacturing Practices) For the manufacturing facility, laboratories, production line
• cGMP (Current Good Manufacturing Practices) employs the individuals follow 21 CFR 210 -211 & 820
• GLP (Good Laboratory Practice) Eliminate contamination & FOD & ESD.
• JSC (Johnson Space Center) GFE Flight Development Projects and Management.
• 21 CFR Subpart 210, 211, & 820.70, (Code of Federal Regulations) FDA (Food and Drug Administration), 21 CFR 36 Subchapter B Subpart(s) 1220-1239, CFR 1910 Subpart 1 & 1910.132 Subpart(s) 1220-1239. 40 CFR parts 260-273, 40 CFR parts 260-273,
• 14 CFR Part 21.1 – 21.700, 45 (Aeronautics & Space) Subpart F, G & K Production 8110.42. 8120.22, 8120.23
• WI (Work Instructions) for each product and each customer’s requirements
• SOP (Standard Operating Procedures) machines, tools, and processes
• NPI (New Product Introduction) prototypes to thoroughly refined reproducible final product.
• PPAP (Production Part Approval Process),
• PPQA (Production and Process Quality Assurance).
• MRB (Material Review Board).
• RMA (Return Material Authorization).
• NCR (Non-Conformance Reports).
• SCAR (Supplier Corrective Action Reports).
• CAR/PAR (Corrective Action Reports/Preventative Action Reports).
• Root Cause (Investigation of where and how the problem originated )
• SWOT (Strengths, Weakness, Opportunity, Threats)
• ECO/ECN (Engineering Change Order/Engineering Change Notice),
• QRM (Quality Risk Management)
• Traceability of Material (Heat #'s, processes, certifications)
• Traceability of products and components certifications and processes of testing.
• ASME Y 14.5 GD&T (American Society Mechanical Engineers) (Geometric Dimensioning & Tolerances).
• ANSI Y 14.5 (American National Standards Institute) GD&T,
• ASTM (American Society for Testing and Material),
• NIST (National Institute of Standards and Technology).
• OEM (Original Equipment Manufacturer)
• Gauge R&R (Repeatability & Reproductivity) of setups and processes of material for parts and assemblies).
• CTQ (Customer Requirements for each specific product for customer satisfaction and return business)
• KPI (Key Performance Indicator) Company-revenue growth, client revenue, client retention rate, profit margins, customer satisfaction. Employee-happiness, quality, abilities, skills, adaptability, intelligence.
• SPC (Statistical Process Capability) Cp & Cpk, Pp & Ppk, Cm & Cmk (K = 1.33 yield, 1.67, and Six Sigma 2.00) to achieve zero defects with proper training, no deviation from setup & process, maintenance of machines and tools, upper & lower tolerances identified CTQ and Customer Satisfaction.
• SCP (System Control Program) control of product from receiving to final inspection, date and time at each process
• CMMI (Capability Maturity Model Integration),
• ANOVA (Analysis of Variance), variations of outcome results from series of test.
• RoHS (Restriction of Hazardous Substance)
• RCRA (Resource Conservation & Recovery Act)
• Lean Manufacturing - eliminate wasted time by moving (if possible) each process closer to each other, cutting out delays in between processes, vendors, and employees.
• Safety Inspections - Equipment OSHA Occupational Safety & Health Administration) CFR 1926 & 1412, Work Area CFR 1910 Subpart D, Protective Gear CFR 1910 Subpart 1 & 1910.132, CAL OSHA(checklist, extinguishers, First Aid Kits. Eye gear, Eye Wash/Shower Stations. Gloves, gowns, smocks, masks.
• Hazardous Waste 40 CFR parts 260-273, Disposal RCRA (Resource Conservation & Recovery Act Regulations Title 40 CFR.
• Gases Storage 29 CFR 1926.350(a) (7); securing compressed gas cylinders (a) Transporting, moving, and storing compressed gas cylinders.
• Passivation Material (Stainless Steels & Aluminum) prevents oxidation- Nitric Acid & Citric Acid, Bluing damaged areas Ferrous Metals.
• Procurement of projects - all information, raw material, equipment, components, products, supplies, services, testing, certifications PO’s (Purchase Orders), timelines, processes, services, timelines projects, resources and costs.
• Development of new and existing products, production lines - timelines, raw materials, processes, procedures, supplies, equipment, testing (electrical , structural), certifications, resources, disposal of hazardous waste, storage of hazardous materials.
• Six Sigma, Lean Manufacturing. Kaizen, Kanban, 5 whys, 5S, implementing & training in continuous improvement to eliminating wasted time, material and money while increasing productivity & profits. finding the root cause of problems and correcting where the problem arose and reassuring problem will not come back proper maintenance on equipment, the replacement of worn tools and gauges, proper tools & (Equipment training with WI and SOP being revised for the customer’s specifications eliminates a majority of down time & wasted material. Not having to rework product which takes away from production and adds to the overall costs to the product, company, and customer.

Quality Manager | Ambrit Industries Inc. 2019 - 2019

Die Casting
• Die Casting, ISO 9001, 14791, 31000, GMP, cGMP, RCCA, CA, PA, SCAR, RMA, RTV, MRB, CTQ, PPAP, PPQA, SPC, SWOT, RCRA, RoHS, Gauge R&R, Lean Manufacturing, Traceability, Control Process Methods, Charts, travelers, Safety checklist, Safety coordinator, verifications, customer relations, aerospace, medical device, commercial products.
• Manage and train inspectors as well as operators of casting & CNC machines.
• Procedures, Internal Audits, Summary Reports, ANSI Y 14.5 Traceability, Control Process, Methods, Charts, travelers.
• In process verification of dimensions of product of CNC lathes and mills, coatings, paint of CTQ’s critical dimensions/requirements to the customer for each product.
• Create and implement inspection and testing criteria or procedures.
• Identify quality problems or areas for improvement and recommend solutions.
• Monitor performance of quality control systems to ensure effectiveness and efficiency.
• Review and update standard operating procedures or quality assurance manuals.
• Document testing procedures, methodologies, or criteria.
• Generate and maintain quality control operating budgets.
• Audit and inspect subcontractor facilities including external laboratories.
• Produce reports regarding nonconformance of products or processes, daily production quality, root cause analyses, or quality trends.
• Direct the tracking of defects, test results, or other regularly reported quality control data.
• Monitor development of new products to help identify possible problems for mass production.
• Communicate quality control information to all relevant organizational departments, outside vendors, or contractors.
• Participate in the development of product specifications.
• Instruct staff in quality control and analytical procedures.
• Confer with marketing and sales departments to define client requirements and expectations.
• Verify that raw materials, purchased parts or components, in-process samples, and finished products meet established testing and inspection standards.
• Identify critical points in the manufacturing process and specify sampling procedures to be used at these points.
• Review statistical studies, technological advances, or regulatory standards and trends to stay abreast of issues in the field of quality control.
• Instruct vendors or contractors on quality guidelines, testing procedures, or ways to eliminate deficiencies.
• Review quality documentation necessary for regulatory submissions and inspections.
• Analyze quality control test results and provide feedback and interpretation to production for: Ford Inc., Toyota Inc, Blue-White Industries Inc., Enhanced Vision Inc., Kenwalt Inc., Graco MFG Co., Danchauk MFG. Inc., Product Metal Forming Inc..
• Coordinate the selection and implementation of quality control equipment, such as inspection gauges.
• Direct product testing activities throughout production cycles.
• Collect and analyze production samples to evaluate quality
• Safety checklist, Safety coordinator, verifications, customer relations, aerospace, medical device, commercial products,
• House mold maintenance and repair, every type of hydraulic pressure and directional control, every hose and fitting, every nut and bolt, as well as every electric limit switch, PLC, magnetic starter and electric motor in use in the plant.
• SPC (Statistical Process Capability) Cp & Cpk, Pp & Ppk, Cm & Cmk (K = 1.33 yield, 1.67, and Six Sigma 2.00) to achieve zero defects with proper training, no deviation from setup & process, maintenance of machines and tools, upper & lower tolerances identified CTQ and Customer Satisfaction.
• Customers: Ford, Toyota, Blue-White Industries, Enhanced Vision Inc., Gracco Industries Inc., Danchuck Industries Inc.
• House mold maintenance and repair, every type of hydraulic pressure and directional control, every hose and fitting, every nut and bolt, as well as every electric limit switch, PLC, magnetic starter and electric motor in use in the plant.

CAD Design Engineer | Impak Corporation 2019 - 2019
(VACUUM SEALER MACHINES) SOLIDWORKS

• Using SolidWorks 3-D (2016) Custom designing of Vacuum seal machines every piece and assembly to build custom Packaging machine pneumatics, nitrogen.
• Standard offerings or custom fabricated in our workshop to your exact specs. of your machine,
• Food Industries, Pharmaceutical Industry, Electronic Industry, Aerospace Industry, NASA, UL, set up revisions to be signed off by each representing division in company.
• New explosion-proof sealers
• Heat sealer with vacuum and gas flush to suspend time and force out destructive gases. Not only does this save on expensive airfreight, it also eliminates environmentally harmful Expanded Polystyrene (EPS) packaging.

Quality Manger/CAD Design Engineer | GP Strategies 2018 - 2018

• (BOEING STARLINER CST-100 GCU) QMS Quality management System) (setup non-existing quality management system ISO 9001, 14791).FAA, 14 CFR 21, 14 CFR Part 400-460, NASA/JSC Specifications Procedures. Boeing auditors.
• ADP (Acceptance Data Package) CAPA, SCAR, RCCA, MRB, MRB Cage (built), RMA, RTV, Traceability
• Receiving Inspection, Clean room (built), All forms, Excel, Vendors, Customer Relations, Procurement Projects, management of projects.
• PO’s for all -pipes, fittings, valves. nuts, bolts, sensors, compressors, heat exchangers, condensers, electrical, gases, hazardous waste, transportation., special instructions Lean Manufacturing, Six Sigma
• Procurement of replacing all material, components, valves, fittings, pipe lines, electrical wiring, monitors, alarms & panels at Cape Canaveral Kennedy Space Center.
• Create and implement inspection and testing criteria or procedures.
• Identify quality problems or areas for improvement and recommend solutions.
• Monitor performance of quality control systems to ensure effectiveness and efficiency.
• Review and update standard operating procedures or quality assurance manuals.
• Document testing procedures, methodologies, or criteria.
• Generate and maintain quality control operating budgets.
• Audit and inspect subcontractor facilities including external laboratories.
• Produce reports regarding nonconformance of products or processes, daily production quality, root cause analyses, or quality trends.
• Direct the tracking of defects, test results, or other regularly reported quality control data.
• Monitor development of new products to help identify possible problems for mass production.
• Communicate quality control information to all relevant organizational departments, outside vendors, or contractors.
• Participate in the development of product specifications.
• Instruct staff in quality control and analytical procedures.
• Confer with marketing and sales departments to define client requirements and expectations.
• Verify that raw materials, purchased parts or components, in-process samples, and finished products meet established testing and inspection standards.
• Identify critical points in the manufacturing process and specify sampling procedures to be used at these points.
• Review statistical studies, technological advances, or regulatory standards and trends to stay abreast of issues in the field of quality control.
• Instruct vendors or contractors on quality guidelines, testing procedures, or ways to eliminate deficiencies.
• Review quality documentation necessary for regulatory submissions and inspections.
• Coordinate the selection and implementation of quality control equipment
• Analyze quality control test results and provide feedback and interpretation to production Boeing/NASA.
• BOEING STARLINER CST-100 GCU CCTS (Commercial Crew Transportation System) Ground Cooling Unit

Quality Assurance | Alliance Metal Products 2017-2017

• Surface Plate Inspections, CMM Mitutoyo COSMOS Software, Vision System, QC 5000. Calipers, Micrometers, Optical Comparators (& Molds), Bore Gages, Universal Concentric Gauges, Drop Indicators, Go-No-Go Gages, NCR, CAPA, RCCA, RGM, RMA, Log Inspection
• In process verification of dimensions of product of CNC lathes and mills thickness of coatings and paint of CTQ’s critical dimensions/requirements to the customer for each product.
• SPC (Statistical Process Capability) Cp & Cpk, Pp & Ppk, Cm & Cmk (K = 1.33 yield, 1.67, and Six Sigma 2.00) to achieve zero defects with proper training, no deviation from setup & process, maintenance of machines and tools, upper & lower tolerances identified CTQ and Customer Satisfaction.
• Customers: Aerovironment Inc., Circor Aerospace Inc., Quality Fabrication Inc., Electro-Adapters Inc. Marty’s Hobbies.

Supplier Quality Engineer | Skylock Industries 2015-2016

• AS 9100, AS 9101, ISO 9000, 9001, 14791, 31000 ANSI Y 14.5, NADCAP, NIST, ITAR, NPI, FAA, GMp, cGMP, 14 CFR Part 21, 14 CFR Part 400-460, (BOEING 737)
• Supplier Quality, Control Process Methods, Traceability AS 9100, AS 9101, ISO 9000, 9001 ANSI Y 14.5 NADCAP, NIST, ITAR, NPI, FAA 14 CFR 400-406, BAC 5946, 5619 AMS 5727, 5525, 5732, 5844, 5845, 5643, 5659, 5520, 2759 ASTM 693,
• Heat Treatment/Temper, Suppliers/Vendors Audits, Lean Manufacturing, Word, Excel, Power Points, MRB, RMA, ECO/ECN, NCR, SCAR, CAPA,RCCA, CMMI, SCP, PPAP, PPQA, CTQ, SPC, KPI, SWOT, ANOVA Gauge R&R, FMEA, Traceability, Summary Reports, Internal Audits, ISO Audits, Procedures, Processes, Training, Charts, Rockwell Hardness Test, Passivation of Steel-Nitric Acid, Citric Acid, Aerospace Products, hinges, fasteners, Boeing specs.
• Instruct staff in quality control and analytical procedures.
• Confer with marketing and sales departments to define client requirements and expectations.
• Verify that raw materials, purchased parts or components, in-process samples, and finished products meet established testing and inspection standards.
• Identify critical points in the manufacturing process and specify sampling procedures to be used at these points.
• Review statistical studies, technological advances, or regulatory standards and trends to stay abreast of issues in the field of quality control.
• Instruct vendors or contractors on quality guidelines, testing procedures, or ways to eliminate deficiencies.
• Review quality documentation necessary for regulatory submissions and inspections.
• Analyze quality control test results and provide feedback and interpretation to production management or staff.
• Coordinate the selection and implementation of quality control equipment, such as inspection gauges.
• Direct product testing activities throughout production cycles.
• Collect and analyze production samples to evaluate quality.
• Rockwell Hardness Test, Passivation of Steel-Nitric Acid, Citric Acid, Aerospace Products, hinges, fasteners.
• Boeing specs. BAC 5946, 5619 AMS 5727, 5525, 5732, 5844, 5845, 5643, 5659, 5520, 2759 ASTM 693, Heat Treatment/Temper, Suppliers/Vendors Audits, Lean Manufacturing, Word, Excel, Power Points, MRB, RMA, ECO/ECN, NCR, Root Cause, SCAR, CA, PA, CMMI, SCP, PPAP, PPQA, SWOT, ANOVA, Gauge R&R, FMEA,
• Customer: Boeing 737 landing gear, cargo hinges.

CAD Design Engineer | Ronan Engineering Company | 2014 - 2015

• AutoCAD & SolidWorks to design parts, Wiring, and Assemblies of Alarm Annunciators, Leak monitors, Recorders, Nuclear Power Plants, Waste Management, Power Plants, Petroleum Wells, Word, Excel, Power Points.
• ISO 9000, 9001, NQA, ANSI Y 14.5 Certifications NRC, NEMA, SAMA, ANSI, IEEE, ISA, CE, ATEX, IEC, UL, FM, CSA. AUTOCAD & SolidWorks to design parts, Wiring, and Assemblies of Alarm Annunciators, Leak monitors, Recorders, Nuclear Power Plants, Waste Management, Power Plants, Petroleum Wells, Word, Excel, Power Points.

Quality Assurance | Adel Wiggins | 2014 - 2014

• Inspection of Aviation –Aerospace fuel isolators, composites, assemblies. GDT, ANSI Y 14.5.
• ITARS, NADCAP, AS9100, 9101, 9102, ISO 9001, 14791, 31000, 14 CFR Part 21.
• NCR, CAPA, RCCA, MRB, RMA, RTV. Log Sheets.
• Surface Plate Inspections, CMM Mitutoyo (COSMOS & manual), Vision System, and QC 5000. Calipers, Micrometers, Optical Comparators (& Molds), Bore Gages, Universal Concentric Gages, Drop Indicators, Go-No-Go Gages, Log Inspection Sheets,
• Lean Manufacturing.
• In process verification of dimensions of product of CNC lathes and mills, thickness of coatings and paint of CTQ’s critical dimensions/requirements to the customer for each product.
• SPC (Statistical Process Capability) Cp & Cpk, Pp & Ppk, Cm & Cmk (K = 1.33 yield, 1.67, and Six Sigma 2.00) to achieve zero defects with proper training, no deviation from setup & process, maintenance of machines and tools, upper & lower tolerances identified CTQ and Customer Satisfaction.
• Customers: Boeing 787, Airbus, Mitsubishi, fuel thermal isolators, fuel lines.

Quality Supplier Engineer/Tech III | Teledyne Microelectronic Technologies | 2005 - 2009

• RECIEVING INSPECTION ANSI Y 14.5 NCR, CAPA, SCAR, RCCA
• MILITARY, AEROSPACE, DEPARTMENT OF DEFENSE, FAA, MEDICAL, COMERCIAL PRODUCT
• (CMM) COORDINATE MEASURING MACHINE – (OGP) Optical Gage Prod. Smartscope FLASH 200. Programmed and Ran (over 8,000 hrs.) for (DOD/NSA) Product, Aerospace, Defense, Military, Medical Device
• ISO 9000, 9001, 13485, 17025, 14791, 31000 AS 9100, 9101, 9102, DSCC, FAA GMP, cGMP, GLP, 14 CFR Part 21, 14 CFR Part 400-460, 21 CFR Subpart 210 – 211 & 820, MIL-STD 883, MIL-STD 810, MIL-PRF-38534, 38535. •All Electrical Part 820,
• Pre-Burn-In, Burn-In Post-Burn-In, Temp. Cycling, Constant Acceleration, Wire Bond Pull, Die Shear Test
• (Xrf) X-ray Fluorescence Fischer X-DAHL - programmed and ran Element Analysis & Plating Thickness.
• Calipers, Micrometers, Gages, Surface Plate Power Meters HP 4277A, HP3478 A, Oscilloscopes.
• Sonoscan, Spectrum Analyzer, Noise Configuration.
• Development of new and existing products, production lines - MPO (Maryland Procurement Office), PAC-3 (Patriot Advanced Capability-3) Boeing/Lockheed Martin, Mars ROVER Spirit & Opportunity NASA/JPL, Space Shuttle STS-118 boosters, St. Jude medical heart defibrillator, Medtronics pacemakers dual chambers & Micra, hearing aids ,timelines, raw materials, processes, procedures, supplies, equipment, testing (electrical , structural), certifications, resources, disposal of hazardous waste, storage of hazardous materials.
• Six Sigma, Lean Manufacturing. Kaizen, Kanban, Traceability. Summary Reports, AS Audits, ISO Audits, DSCC Audits, Supplier Audits, Internal Audits, MRB, RMA, NCR, ECO/ECN, SCAR, CAR/PAR, CMMI, SCP, PPAP, PPQA, ANOVA, Gauge R & R, FMEA, DFMEA, FAA SWOT, ITARS, NIST, NADCAP, AS 400 storage & retrieval system.
• FOD (Foreign Object Damage) control clean rooms ppm. Daily particle count
• ESD –Testing of workstations groundings, individuals, constant humidity readings, log books
• Create and implement inspection and testing criteria or procedures.
• Identify quality problems or areas for improvement and recommend solutions.
• Monitor performance of quality control systems to ensure effectiveness and efficiency.
• Review and update standard operating procedures or quality assurance manuals.
• Document testing procedures, methodologies, or criteria.
• Generate and maintain quality control operating budgets.
• Audit and inspect subcontractor facilities including external laboratories.
• Produce reports regarding nonconformance of products or processes, daily production quality, root cause analyses, or quality trends.
• Direct the tracking of defects, test results, or other regularly reported quality control data.
• Monitor development of new products to help identify possible problems for mass production.
• Communicate quality control information to all relevant organizational departments, outside vendors, or contractors.
• Participate in the development of product specifications.
• Instruct staff in quality control and analytical procedures.
• Confer with marketing and sales departments to define client requirements and expectations.
• Verify that raw materials, purchased parts or components, in-process samples, and finished products meet established testing and inspection standards.
• Identify critical points in the manufacturing process and specify sampling procedures to be used at these points.
• Review statistical studies, technological advances, or regulatory standards and trends to stay abreast of issues in the field of quality control.
• Instruct vendors or contractors on quality guidelines, testing procedures, or ways to eliminate deficiencies.
• Review quality documentation necessary for regulatory submissions and inspections.
• Analyze quality control test results and provide feedback and interpretation to production, MPO (Maryland Procurement Offic) DOD/NSA, JPL/NASA Boeing, Harris, Lockheed Martin, Raytheon, Aerojet, L3, Sierra Monolithics, Lucent, St. Jude Medical, Medtronic’s, Career Inc..
• Coordinate the selection and implementation of quality control equipment, such as inspection gauges.
• Direct product testing activities throughout production cycles.
• Collect and analyze production samples to evaluate quality.

Computer Consultant | G.L. Consulting | 03/2003 - 05/2005

• Format, installed programs, maintained computers, additions, networks for multiple businesses
• Desktops, Laptops, Wireless, Routers, Switches, IP Addresses, Virus, Spyware Protection.
• Read technical manuals, confer with users, or conduct computer diagnostics to investigate and resolve problems or to provide technical assistance and support.
• Modify and customize commercial programs for internal needs.

Test Technician | Teledyne Microelectronic Technologies | 2000 - 2003

• ISO 9000, 9001, 13485, 17025, 14791,3100
• AS 9100, 9101, 9102, DSCC, FAA, GMP, cGMP, GLP, 14 CFR Part 21, 14 CFR Part 400-460,
• 21 CFR Subpart 210 – 211 & 820,MIL-STD 883, MIL STD-810 G, MIL-PRF-38534, MIL-PRF 38535
• Aerospace & Commercial Products Testing Relays, Oscilloscopes, Power Meters, Decade Boxes, Centrifuge, Sonoscan, Ionograph, Cycling etc. Series of electrical test performed on AC & DC solid-state relays.
Optically Isolated, Silicon Carbide, Optically Isolated, Short-Circuit Protected, True-Output Status-Feedback, Flat Trip Short-Circuit Protection, Normally Closed Dual-Output, 3-Phase, Output Bidirectional. AC & DC solid state relays.
• Environmental electrical testing AC & DC Relays 3-temperature testing Voltage drop, Vmax, Vmin, I max, I min, forward & reverse bias current, cycling, burn-in, constant acceleration.
• Production Line Butterfly Packages for Fiber Optics. preformed solder organic flux attached pump cooler, workstation and camera, feed fiber optics for communication through ferrule with Sonoscan (ultrasound) solder voids per quadrant overall percentage of voids, Ionograph (contamination testing), cleaning of product with DI water and nitrogen. Built and supervised crew to build, cells, workstations, set up equipment for production lines. Set and maintained process of these lines.
• FOD (Foreign Object Damage) control clean rooms ppm. Daily paticle count.
• ESD – Testing of workstations groundings, individuals, constant humidity readings, log books.
• Customer products for: JPL/NASA Boeing, Harris, Lockheed Martin, Raytheon, Aerojet, L3, Dow Corning, Sierra Monolithics, Lucent, St. Jude Medical, Medtronics, Corning/Dow, Lucent, JDS, McDonnell Douglas F-16 Falcon, , General Dynamics F/A-18 Super Hornet, Lockheed Martin F-22 Raptor. Harris, L3.
• Six Sigma, Lean Manufacturing. Kaizen, Kanban, AS 400 storage and retrieval system.

Education:

CALIFORNIA STATE UNIVERSITY LOS ANGELES (Towards), Bachelor's Degree in Mechanical Drafting Graphic Design Engineering | 2015
PIERCE COLLEGE, Associate Degree in CNC (COMPUTER NUMERICAL CONTROL) Programming/Operator/Machine Shop| 2014
PIERCE COLLEGE, Associate Degree in Mechanical Drafting | 2012
PIERCE COLLEGE, Associate Degree in Electrical, Electronics and Communications Engineering | 2011
MOORPARK COLLEGE, Associate Degree in Laser Electro-Optics | 1993

* Published in 2013 Los Angeles Pierce College workbook for advanced machine shop students for 16 pages of Arbor Press Project for parts and assembly, and 1 page for 1, 2, 3, Block Project, done in Solidworks and 16 pages of GD & T to verify all parts geometric dimensions and tolerances, for Ron Smetzer head of the Industrial CNC and Machine Shop for Los Angeles Pierce College.
  • Principals only. Recruiters, please don't contact this poster.

post id: 7755761563

posted:

updated:

best of [?]

loading
reading
writing
saving
searching