Swanstrom Oval-Shape Cutter Set - Jewelry Making - $300 (Pacoima)
QR Code Link to This Post
Swanstrom Oval-Shape Cutter Set
Item No. 112547
Also Includes Center-Positioning Die Set for Swanstrom Oval-Shape Cutters Item 11254701
Brand new and unused sitting in my shop gathering dust - perfect condition - photos show dust and preservative packing oil...
Cut clean, consistent shapes that release quickly and easily with the oval-shape cutter that outperforms them all. All Swanstrom shape cutters are manufactured in the USA and provide decades of consistent service.
• The top and bottom plates, and all punches are made of S7 shock-resistant tool steel through hardened to 55 HRC.
The Swanstrom shape cutter offers punches with precision-ground surfaces, to deliver smooth edges requiring minimal clean up. The tight tolerances between the punches and the spring-loaded die plate ensure clean cuts while prolonging the service life of the disc cutter.
The die plate clamps your metal to prevent distortion and keeps your fingers out of the way. It’s easy to open and close, so that you can adjust the cutter for your material. Place a shim of the same thickness as the material being cut on the opposite side of the disc cutter to keep the plates balanced.
Great for soft materials up to 16 gauge (1.29mm) when using a mallet and up to 10 gauge (2.59mm) when using a Bonny Doon hydraulic press. Use a urethane pad (1/16" thick, 95 durometer; not included) under the cutters to reduce noise, support your cutters, protect your work surface and ensure a crisp cut.
• two-die plates, 3"W x 5"D x 1-1/16"H (76.2 x 127 x 26.99mm)
• four punches, each is 2" (50.8mm) tall:
—1/2" x 23/32" (12.7 x 18.25mm)
—5/8" x 13/16" (15.87 x 20.63mm)
—3/4" x 15/16" (19.05 x 23.81mm)
—7/8" x 1-3/16" (22.22 x 30.16mm)
• one Allen wrench.
• a strong rubber base, 6" x 6" x 1/2" (152.4 x 152.4 x 12.7mm), that conveniently holds the cutter and dies.